Neatech EVO3, Service Manual, Page: 80 / 93

www.neatech.it
80
ASSIST (AXES 5)
This position is useful to facilitate movement in and out the wheelchair.
It is possible to set the angle of backrest, the angle of legrest and the height of the seat, setting
the parameters PA1, PA2 and PA3
Figure 88
SEMISTANDING (AXES 6)
This position is useful to drive the wheelchair with a minimum lift and negative tilt
It is possible to set the angle of backrest, the angle of legrest, the height of the seat and the
angle of the seat setting the parameter PA1, PA2, PA3 and PA4
Figure 89