Neatech EVO3, Service Manual, Page: 13 / 93

www.neatech.it
13
2.3.1 Remove the EVO3 from the pallet
Figure 2
Figure 3
Unlock the engine with the lever on the left and right side as shown in Figure 2 and Figure 3 and
slide gently down the EVO3 from the pallet.
After positioning the EVO3 in a safe place, return the lever to its original position.
PACKAGING DIASPOSAL
To properly recycle the packaging materials follow the instructions
provided by your local waste disposal service.
2.4 Assembly operation
Mount the backrest on the wheelchair as it is described in section 2.6 - ADJUSTMENTS.
2.5 Transport and storage
If you do not use your EVO3 for a long time make sure that you set the switch OFF as shown in
Figure 4. You should keep the EVO3 in a place free from dust and moisture and away from heat
sources. If you need to transport the EVO3, turn off the switch.
For the transport be sure that the vehicle is approved for this purpose and set the brake release
levers in right position (UP, brakes engaged)
The wheelchair isn’t intended to be dismantled for storage or transport.
Figure 4