Neatech EVO3, Service Manual, Page: 44 / 93

www.neatech.it
44
3 Instructions for replacing parts
3.1 Backrest actuator
First assure that the wheelchair is on a level surface and it is at the default position (see section
2.7.2 ).
If the wheelchair has any problem at the seating system for which it is not
possible to reach the default position, please contact the manufacturer
Remove the plastic cap form the actuator cable and unplug the cable. To remove the backrest
actuator remove the parts (1), (2) and (3) shown in Figure 48 in this order and then take away
the actuator
Figure 48
For the replacement use only parts supplied be the manufacturer
Part number Description
R042-002 Backrest actuator
To mount the new part follow the instruction in reverse order.
1
2
3