NCR 7452, User Manual

Page: 71 / 261

Chapter 2: Workstation Hardware Installation 2-15
For packing purposes the Peripheral Tray and display(s) are mounted
to the 7452 Base Unit.
1. Remove the Peripheral Tray and display(s) from the Base Unit and
mount them on the Cash Drawer.
•
Rotate the Display Arm so that it points 90
o
away from the
workstation. Pry the side of the Display Access Cover out from
the Base Unit slightly and lift it off.
14326
Display Access Cover
Rotate the Display Arm to 90 degrees
from the Base Unit.
Pry the side
of the Display
Cover out and
lift the cover
off.
•
Remove the three screws in the Peripheral Tray.
•
Place the Peripheral Tray and displays on the Cash Drawer and
secure it with the three screws.
2. Place the Cash Drawer with attached peripherals in the desired
location.
3. Place the Base Unit in the desired location.
4. Route and connect the cables between the two assemblies (refer to
the cable connector illustrations earlier in this chapter).