NCR 7452, User Manual

Page: 106 / 261

3-26 Chapter 3: Installing Optional Hardware Features
7. Plug the LCD cable’s right angle connector into the 5953 DynaKey.
•
Optional - Plug a scanner cable into the 5953 DynaKey.
•
Optional - Plug a PC-compatible keyboard cable to the
5953 DynaKey.
8. Route the cable(s) through the upper half of the Checkstand Base
and install the Thumbscrew and the Front Cover. Be sure to leave
enough slack in the cable(s) to permit easy tilting of the
5953 DynaKey.
9. Route the cable(s) into the lower half of the Checkstand Base and
through the countertop.
10. Slide the Side Cover onto the lower half of the Checkstand Base.
11. Slide the upper half of the Checkstand Base into the lower half of
the Checkstand Base and tighten the Thumbscrew.