NCR 7452, User Manual

Page: 150 / 261

3-70 Chapter 3: Installing Optional Hardware Features
Installing a Win95 Intel EtherExpress Pro Adapter
Driver
Install the Intel EtherExpress Pro Adapter Driver only after installing
the Intel PIIX PCI Bus Master IDE Controller. The EtherExpress uses
the PIIX IDE Controller bus mastering DMA interface.
The driver is available on the NCR 74xx Base System and Client Third
Party Products CD (LPIN: D370-1111-0100) under the C:\install
directory. Follow these steps to install the driver:
1. Select Start/Settings/Control Panel.
2. Double-click on the System icon.
3. Select the Device manager tab.
4. Double-click on Other Devices and remove the PCI Ethernet device.
5. Select OK to continue. Do not Reboot at this time.
6. Select Network in the control panel.
7. Click on Add.
8. Select Adapter and click on Add.
9. Select Have Disk. Enter the path of the LAN Drivers.
10. Choose Intel EtherExpress PRO PCI Adapter.
11. Remove Client for NetWare Networks and IPX/SPX compatible
Protocol.
12. Click on Add.
13. Select Protocol and click on Add.
14. Select Microsoft TCP/IP.
15. Click on the Identification Tab in the Network window.
16. Assign a Computer Name and Workgroup.
17. When prompted reboot the computer.