NCR 7452, User Manual

Page: 170 / 261

4-6 Chapter 4: Setup
3. Move the cursor to the Exit Menu, select Exit Saving Changes and
press Enter.
Configuring a Flex Drive
Your workstation comes with a 1.44 MB, 3 ½" flex drive, which is the
Setup default. If you are installing a 3 ½" flex drive or an additional flex
drive, you need to configure the system as follows:
1. Move the cursor to the Legacy Diskette A field on the Main Menu
and select the type of drive installed. Press Enter in the Legacy
Diskette field to see the available options.
2. Move the cursor to the Legacy Diskette B field on the Main Menu
if you have a second flex drive installed and select the type of drive
installed. Press Enter in the Legacy Diskette field to see the
available options.
3. Move the cursor to the Exit Menu, select Exit Saving Changes and
press Enter.
Setting Memory Cache
The default setting enables memory cache. If your application requires
memory cache to be disabled, you can change it by performing the
following steps:
1. Move the cursor to the Memory Cache field on the Main Menu
and press Enter. The Memory Cache Menu appears.
2. Select Enabled in the Memory Cache field to enable the memory
cache.
3. Set the other fields on this menu as desired. Select Help for more
information.
4. Move the cursor to the Exit menu, select Exit Saving Changes and
press Enter.