NCR 7452, User Manual

Page: 104 / 261

3-24 Chapter 3: Installing Optional Hardware Features
Installing a Checkstand Base
The cable(s) for a 5953 DynaKey can be routed through the Checkstand
Base. To install a 5953 DynaKey onto a Checkstand Base, follow these
steps:
1. Loosen the Thumbscrew on the side of the Checkstand Base and
then slide the upper half of the Checkstand Base out of the lower
half of the Checkstand Base.
17321
Checkstand Base
(Upper Half)
Thumbscrew
Checkstand Base
(Lower Half)
Mounting Plate
Side Cover
2. Slide the Side Cover off the lower half of the Checkstand Base.
3. In the appropriate location on the countertop, drill four 6 mm
(¼") holes for the mounting bolts and one 38-mm (1 ½") hole for the
5953 DynaKey cable(s).
4. Bolt the lower half of the Checkstand Base to the countertop.