NCR 7452, User Manual

Page: 168 / 261

4-4 Chapter 4: Setup
Running Setup
Entering Setup
To enter the Setup utility, start your workstation. When the
workstation prompts you, press the F2 key to enter Setup. The Setup
Main Menu
appears.
Use the arrow keys to select options. Use the + and - (or F5 and F6)
keys to change values. To view help information about the possible
selections for the highlighted item, press F1. To save any changes,
move the cursor to the Exit Menu, select either Exit Saving Changes or
Save Changes
, and press Enter.
Setting the Date and Time
To set the date and time, perform the following steps:
1. In the Setup Main Menu, move your cursor to the System Time
field, type the desired value, and press Tab or Enter to continue
with the next field.
2. Enter the desired date in the System Date field the same way as the
last step.
3. Move the cursor to the Exit Menu, select Exit Saving Changes or
Save Changes
, and press Enter.
Setting Passwords
To set passwords, perform the following steps:
1. Move the cursor to the Set Supervisor Password selection and
press Enter. The Set Supervisor Password Menu appears. From
this menu, the person setting up the password system can set the
security password. Users can set user passwords.
2. Move the cursor to the Exit Menu, select Exit Saving Changes and
press Enter.