NAVIOR-24S
™
CHAPTER III
Software Interface
48
NAVIOR-24S ™
Revision
V1.00 20.05.2008
Custom Port Configuration
The user may change port adjustments using protocol BINR or NMEA.
Using BINR packet 0Bh the user may change port adjustments (see Appendix A). SW BM_Ctrl
also can be used to customize the NAVIOR-24S GPS/GLONASS receiver configuration port
settings (see Appendix
В
).
Warning – The configuration adjustments of ports fulfilled on protocol BINR will not be
stored in NVRAM.
Using protocol NMEA Message $PORZB the user may change or expand the list of transmitted
NMEA Messages in NAVIOR-24 GPS/GLONASS receiver. See Appendix C.
WARNING – Saving of list of transmitted messages fulfils every 10 seconds (after getting
$PORZB message).
Using protocol NMEA Message $ACFRM customer may always set the default settings.
Format of $ACFRM Message see in Appendix C
