User’s manual NAVIGON 42 Easy | 42 Plus | 42 Premium
Operating the navigation system
- 19 -
No Signal
: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready
: Data is being received from at least 3 satellites. Position
can be calculated.
Simulation
: If a simulation is in progress, the
Demo
symbol will appear
instead of the GPS symbol.
For details of the GPS status refer to chapter "GPS Status, saving the
current location" on page 74.
Compass
The
Compass
symbol indicates in which direction you are currently
heading. It can indicate the following points of the compass:
N, NE, E, SE, S, SW, W, NW
Energy
The
Energy
symbol can indicate the following states of the integrated
battery:
The device is being supplied by an external power source. The battery
is fully charged.
The battery cannot be charged because its temperature is too high.
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
TMC
The navigation system has an integrated TMC receiver which supplies
up-to-date traffic information. Using this information the navigation
system can change your route dynamically, for example in order to
avoid a traffic jam.
Note:
This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
