User’s manual NAVIGON 42 Easy | 42 Plus | 42 Premium
Voice Command
- 25 -
6.3
Help
Say only "Help" if you want to know which voice commands are
currently possible. In nearly all windows in which voice commands are
supported the navigation system will then tell you which commands you
can say in the current window.
6.4
Deactivation of the voice commands function
The voice commands function will be deactivated under the following
conditions:
►
If you operate the navigation device with your finger while a voice
command is expected from you.
►
If a call is received and during an active phone call if the navigation
device is being used as a hands-free module.
6.5
Configuring the voice commands function
You can configure for which tasks you want to use the voice
commands.
►
In the
N
AVIGATION
window tap on
(More) > System
Settings > Voice Command.
Select the tasks for which you want to use Voice Command:
►
Entering Addresses: You can enter only addresses with the
voice command function.
►
Answering: You can enter addresses and answer questions
asked by the navigation device.
►
Complete: You can use all the voice command functions.
Note:
For details of how to enter a destination using voice commands
refer to the chapter "Announcing the address" on page 30.
The volume of the voice commands assistant can be controlled
independently of the volume of the navigation instructions. This means
you can still hear the input requests when you have muted the
navigation instructions.
1. In the
N
AVIGATION
window tap on
(More) > System
Settings > Voice Command > Volume of the Assistant.
2. Select the volume for the assistant.
Note:
For details of how to configure the navigation system refer to the
chapter "Configuring the Navigation System" on page 101.
