154
6. Make sure that the locking mechanism is engaged. Carefully pull back
on the walking deck and make sure that it does not move. When you
do this, keep clear of movement path in case the treadmill lock is not
engaged.
Do not lean against the treadmill when it is folded. Do not put
items on it that could cause it to become unstable or fall.
7. Using a #2 Phillips screwdriver, loosen the indicated screw from the
Rear Roller Cover.
8. Remove the Rear Roller Cover.
To remove the Right Rrear Roller Cover, the Tilt Release
Handle must be pushed for additional clearance. Be sure not
to pull down on the Deck when the Tilt Release Handle is
pushed or the Deck may begin to lower.
9. Using a #2 Phillips screwdriver, remove the 6 indicated screws from
below the Walking Deck that attach the Side Rail.
10. Remove the old Side Rail from the Walking Deck and attach the new
Side Rail with a #2 Phillips screwdriver.
11. Using a #2 Phillips screwdriver, replace the Rear Roller Cover.
To replace the Right Roller Cover, the Tilt Release Handle
must be pushed for additional clearance. Be sure not to pull
down on the Deck when the Tilt Release Handle is pushed or
the Deck may begin to lower.
