17
Contact
Tech Support at
800.861.7401
for further assistance.
Is the issue you
were experiencing
still present?
YES
Issue resolved
Replace I/O cables
NO
NO
Is the issue you
were experiencing
still present?
YES
Unit will not power on, or power is on but Console does not light up
Unplug the power cord
from both ends. Inspect
the entire cord for any
damage or crimps. Plug
the power cord back in
securely at both ends.
Replace power cord if any
damage is noted.
NO
BEGIN HERE
YES
YES
YES
Is the power cord
plugged directly into a
3-prong wall outlet?
Does noise come
from Rear Roller?
Verify outlet is working by
connecting another
device, such as a lamp. If
not working, find a
working outlet.
NO
YES
Is the machine
Circuit Breaker
tripped?
Issue resolved
Replace Circuit Breaker
Press Circuit Breaker
Switch next to the Power
Switch to reset the Circuit
Breaker.
Unplug the power cord
from the wall outlet and
the machine. Wait 5
minutes before proceed-
ing. Remove the Motor
and MCB Covers.
Check/reseat the AC
power wiring using the
“Replace the Power Inlet”
procedure in the Service
Manual as a reference,
and ensure all wires are
correctly connected and
secure.
Check/reseat the AC
power wiring using the
“Replace the Power Inlet”
procedure in the Service
Manual as a reference,
and ensure all wires are
correctly connected and
secure.
Unplug the power cord
from the wall outlet and
the machine. Wait 5
minutes before proceed-
ing. Remove the Motor
and MCB Covers.
NO
Does the Circuit
Breaker keep
tripping?
Connect power cord
directly to a 3-prong
outlet.
NO
