106
13. Using a 6mm hex wrench, remove the hardware from
the Right Upright. Slightly remove the Right Upright from
the Base Assembly exposing the Input/Output (I/O) Cables.
Disconnect the I/O Cables and remove the Right Upright.
Note:
Do not crimp cables.
14. Make sure there is sufficient space to lower the walking
deck.
X2
X2
Keep a minimum clearance behind the machine of 79” (2 m)
and 24” (0.6 m) on each side. This is the recommended safe
distance for access, movement and emergency dismounts
from the machine.
15. Make sure there is no object on or around the treadmill to spill or
cause blockage from the fully unfolded position.
16. Slightly push the walking deck forward toward the console, and then
push the Deck Release Handle until the locking tube releases and you can
pull the walking deck away from the console. Hold up the rear of the walk-
ing deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
17. The hydraulic lift is set up to drop gradually. Hold onto the walking
deck until approximately 2/3 of the movement down. Make sure that you
use proper lifting technique; bend your knees and keep your back straight.
Be aware that the walking deck can possibly drop quickly in the last part of
the movement
