54
5. From the Right Upright, disconnect the Grounding, Input/Output,
Remote Speed Control Cables. Do not allow the Grounding and I/O Cable
to fall into the Right Upright. Secure it with a Zip-Tie, rubber band or piece
of wire.
Note:
Do not crimp the Cables.
6. Using a 6mm hex wrench, remove the indicated hardware from the
Right Upright.
7. From the Left Upright, disconnect the Remote Incline Control Cable.
Note:
Do not crimp the Cables.
8. Using a 6mm hex wrench, remove the indicated hardware from the Left
Upright.
9. Fully remove the Console and Handlebar Assembly from the Uprights.
Right Upright
