162
6. Using a 13mm wrench and a 6mm hex wrench, remove the indicated
hardware from the Transport Wheel.
7. Using a 13mm wrench and a 6mm hex wrench, attach the new Trans-
port Wheel to the Frame Assembly.
8. Replace the Base Shroud on the Frame Assembly.
9. Make sure there is sufficient space to lower the walking deck.
Keep a minimum clearance behind the machine of 79” (2 m)
and 24” (0.6 m) on each side. This is the recommended safe
distance for access, movement and emergency dismounts
from the machine.
10. Make sure there is no object on or around the treadmill to spill or
cause blockage from the fully unfolded position.
11. Slightly push the walking deck forward toward the console. Push the
Deck Release Handle until the lift shock releases and you can pull the
walking deck away from the console. Hold up the rear of the walking deck,
and move to the side of the machine.
Keep clear of the movement path of the walking deck.
12. The hydraulic lift is set up to drop gradually. Hold onto the walking
deck until approximately 2/3 of the movement down. Make sure that you
use proper lifting technique; bend your knees and keep your back straight.
Be aware that the walking deck can possibly drop quickly in the last part of
the movement.
13. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Deck Release Handle
