National ramp ALUMINUM SOLID Installation Manual Download

Page: 60 / 138

18.4.1.

Following the directions of

section 18.2

, install the first platform of the switchback platform.

18.4.2.

Insert two (2) 2/8" x 16 x 1 1/4" Hex Head Bolts into the switchback bracket and slide the
bracket into the platform channel.

18.4.3.

Using the holes in the switchback bracket as a guide, secure the bracket to the groove side
of the platform using driller screws.

18.4.4.

Attach the leg to the bolts of the switchback bracket.

18.4.5.

Continue with the installation of the next platform.

OF NATIONAL RAMP.

1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL

Tongue/Top

[ 60 ]

NATIONAL RAMP

™

| FREEDOM

NOW

www.nationalramp.com | 877-884-RAMP(7267)

image 24

Summary of Contents for ALUMINUM SOLID







































































































































Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands

National ramp ALUMINUM SOLID, Installation Manual

Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands