National ramp ALUMINUM SOLID, Installation Manual

Page: 74 / 138

18.7.18.
Orient the bracket according to the configuration installed, taking special note of the tongue
and groove orientation.
18.7.19.
Rotate the bracket about 30° to insert into the section side channel.
18.7.20.
Fasten bracket into side channel using driller screws (pre-drill to ease installation), confirming
the bracket holes to be used per the chart.
18.7.21.
Pull/push up on the tongue side of the section to verify install. A successful install will not
allow the tongue to disengage from the groove.
Step 6

Place all leg caps, corner guards and end caps needed.
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
1
3
2
4
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
End Caps
Leg Caps
Corner Guards
[ 74 ] NATIONAL RAMP
™
| FREEDOM NOW
www.nationalramp.com | 877-884-RAMP(7267)
image 46
image 47