National ramp ALUMINUM SOLID Installation Manual Download Page 97

Page: 97 / 138

19.7.6.5.

Once the first inside corner vertical picket handrail is assembled to the platform
channel, snug the serrated nuts without fully tightening.

19.7.6.6.

Install the vertical picket handrail on the tongue side of the platform using the
extended bolts from the ramp section vertical picket handrail coming onto the
platform and the switchback bracket on the platform.

19.7.6.7.

Mount the vertical picket handrail
to the extended bolts.

OF NATIONAL RAMP.

1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL

OF NATIONAL RAMP.

1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL

OF NATIONAL RAMP.

1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL

Tongue/Top

Groove/Bottom

[ 97 ]

Liberty Series™ Ramp Installation Guide-Revision 8/1/2020

image 85

image 84

image 86

RAMP INS

ALL

Summary of Contents for ALUMINUM SOLID







































































































































Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands

National ramp ALUMINUM SOLID, Installation Manual

Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands