National ramp ALUMINUM SOLID Installation Manual Download

Page: 128 / 138

21.10.8.

Place all leg caps, corner guards and end caps needed.

21.10.9.

Once all components are tightened, walk and jump up and down the ramp to make sure
the ramp feels secure. Run your hands across all railings to clear any remaining burrs.

21.10.10.

Have the ramp user(s) traverse the ramp to make sure they feel comfortable and are
happy with the result, before reviewing maintenance and care.

OF NATIONAL RAMP.

1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL

End Caps

Leg Caps

Corner Guards

[ 128 ]

NATIONAL RAMP

™

| FREEDOM

NOW

www.nationalramp.com | 877-884-RAMP(7267)

image 127

Summary of Contents for ALUMINUM SOLID







































































































































Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands

National ramp ALUMINUM SOLID, Installation Manual

Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands