National ramp ALUMINUM SOLID Installation Manual Download

Page: 89 / 138

19.6.1.

Select the stair support leg that will extend 12-18" above the platform height.

19.6.2.

Insert two (2) legs through the leg receivers on the step assembly.

19.6.3.

Attach two (2) universal brackets with bolts into the platform side channel.

19.6.4.

Centering the steps on the platform, attach the step assembly, lining up the universal
brackets on the platform with the leg receivers on the step assembly.

OF NATIONAL RAMP.

1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL

OF NATIONAL RAMP.

1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL

[ 89 ]

Liberty Series™ Ramp Installation Guide-Revision 8/1/2020

image 68

image 69

RAMP INS

ALL

Summary of Contents for ALUMINUM SOLID







































































































































Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands

National ramp ALUMINUM SOLID, Installation Manual

Search results

Summary of Contents for ALUMINUM SOLID

Reviews:

Related manuals for ALUMINUM SOLID

Brands by name

Popular brands