National ramp ALUMINUM SOLID, Installation Manual

Page: 69 / 138

18.7.12.
Option 2  T-Post
18.7.12.1.
Install the vertical support of the T-Post as close to the corner as possible. Use a
level to ensure the T-post is plumb.
18.7.12.2.
Starting with the inside corner of the T-post, insert elbows into the ramp handrails,
and measure where the T-post will need to be cut.
18.7.12.3.
Cut the handrails using the pipe cutter and connect the elbows after clearing any
burrs.
18.7.12.4.
Insert elbows on the outside corner of the T-Post and ramp handrails, and measure
filler pipe to fit between the two elbows, using a right angle or triangle to make
sure the railings will be at 90°.
A A
D D
N N
R R
DRAWN
A A
D D
N N
R R
DRAWN
Tongue/Top
Groove/Bottom
[ 69 ]
Liberty Series™ Ramp Installation Guide-Revision 8/1/2020
image 38
RAMP INS
T
ALL