National ramp ALUMINUM SOLID, Installation Manual

Page: 68 / 138

18.7.11.
Option 1  Diagonal railing using elbows
18.7.11.1.
Line up a 4’ level on the end of each ramp section vertically, making sure it is
plumb, and make cut marks, on the top and bottom of each handrail.
18.7.11.2.
Cut the handrails using the pipe cutter, clearing any burrs.
18.7.11.3.
Attach the elbows to both handrails and point the loose ends towards each other.
18.7.11.4.
Line up filler pipe with the elbow on one side, scoring the cut mark on the other
side. Repeat this for the lower handrail.
18.7.11.5.
Cut the pieces of filler pipe and attach it between the handrails.
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
A A
B B
C C
D D
E E
F F
1
1
OF NATIONAL RAMP.
1. FOOT PLACEMENT DIMENSIONS MUST BE VERIFIED BASED ON FIELD CONDITIONS AND ACTUAL INSTALL
Tongue/Top
Groove/Bottom
[ 68 ] NATIONAL RAMP
™
| FREEDOM NOW
www.nationalramp.com | 877-884-RAMP(7267)
image 36
image 37
Trim filler pipe
tubing here