examples are wiring, including cables, bus bars, junction boxes, switches, socket outlets
in the fixed installation, and stationary motors with permanent connections to fixed
installations.
•
Measurement Category IV is for measurements performed at the primary electrical
supply installation typically outside buildings. Examples include electricity meters and
measurements on primary overcurrent protection devices and on ripple control units.
What You Need to Get Started
To set up and use the PXIe-6674T, you need the following items:
•
PXIe-6674T Timing and Synchronization Module
•
PXIe-6674T User Manual
•
NI-Sync driver
•
One of the following software packages and documentation:
–
LabVIEW
–
LabWindows
™
/CVI
™
–
Microsoft Visual C++ (MSVC)
•
PXI EMC filler panels, National Instruments part number 778700-01
•
PXI Express chassis
•
PXI Express embedded controller or a desktop computer connected to the PXI Express
chassis using MXI-Express hardware.
The
NI-Sync User Manual
offers more detailed information on the software used to program
the PXIe-6674T. You can find this manual at
ni.com/manuals
.
Installing and Configuring
This chapter describes how to install the PXIe-6674T hardware and software and how to
configure the device.
Installing the Software
Refer to the
readme.htm
file tha accompanies the NI-Sync driver for software installation
directions.
Note
Be sure to install the driver software before installing the PXIe-6674T
hardware.
PXIe-6674T User Manual
|
© National Instruments
|
5
