NARDA PMM CA0010, User Manual, Page: 9 / 74

General Information 1-1
1 – General Information
1.1 Documentation
Enclosed with this manual are:
•
a service questionnaire to send back to NARDA in case an equipment
service is needed
•
an accessories checklist to verify all accessories enclosed in the
packaging.
1.2 Operating
Manual Changes
Instruments manufactured after the printing of this manual may have a
serial number prefix not listed on the title page; this indicates that
instruments with different Serial Number prefix may be different from those
documented in this manual.
1.3 Introduction
to PMM CA0010
PMM CA0010 a powerful EMI Click Analyzer, fully CISPR 14 compliant, to
measure conducted interferences at the four stated frequencies of 150,
500 kHz, 1.4 and 30 MHz when matched with PMM 9010F EMI Receiver
unit (optional). All measurements performed by the PMM 9010F are
according to the most accepted standards like: IEC, CISPR, EN
(EuroNorm), FCC, VDE, etc.
Thanks to its built-in generator, PMM CA0010 is also suitable for
characterizing and testing any Click analyzer.
The CA0010 has been designed as three instruments in one: an input
preselector and attenuator for the EMI Receiver 9010F, a Line Insulation
Stabilization Network, and a RF Generator.
Document CA0010EN-80502-1.01 - © NARDA 2018