NARDA PMM CA0010, User Manual, Page: 51 / 74

Sweep Mode Operating Instructions 4-5
4.2 Introduction
The PMM CA0010 software package contains the PMM Click Analysis
(PCA) application and the PMM Click Generation (PCG) application.
The PCG is described in chapter 5 of this manual.
The measurement reports can also be downloaded using the PMM Emission
Suit. Please refer to 9010F User’s Manual for additional information.
4.2.1 PMM Click
Analysis
The PMM Click Analysis (PCA) software is used to operate the PMM
CA0010 in conjunction with the PMM 9010F Emi Receiver, as a powerful 4
channels click meter. To enter this mode, simply run the software by double
clicking its icon. Immediately the main window pops up and allows the
operator to set the parameters for the scan or to retrace a saved
measurement. All the automatic settings (RBW, frequencies, limits, time)
refer to the CISPR standard.
Fig. 4-8 Scan
All the relevant information are reported on the screen.
From left to right, the User can see the time trace of the selected frequencies
(also called channels), and the corresponding data and details.
Preselection filters, attenuators and resolution bandwidth are set
automatically by the analyzer as required.
Below the graphs, in the bottom area, there is the Archive frame, where it is
possible to reload an existing measurement or start a new one.