NARDA PMM CA0010, User Manual, Page: 14 / 74

1-6 General Information
1.9 Front Panel
Fig. 1-1 Front Panel
Legend from left to right:
-
LED indications Line, power on;
Data RX and TX show the serial communication flux
Generator: ON, shows stand-by status,
CLICK shows when OOK is ON,
PULSE C. when CISPR pulses are being generated.
LISN L1 and L2 to show which one of the internal LISN lines is selected
-
Artificial Mains Network 16A It is the mains socket where the supply of the EUT must be connected
to for measuring its conducted emissions.
The line comes through the internal LISN and is capable of handling
16 A max current.
-
Artificial Hand standard 4 mm socket
-
Earth ground connector
-
Input and Output connectors LISN OUT to connect the internal LISN directly to a receiver, analyzer
CAL OUT: internal generator output
RF OUTPUT to be connected to the 9010F RF Input
RF INPUT for external ancillaries
-
LISN OUT EN LED ON when the LISN output is internally switched to the BNC connector,
OFF when the LISN output is internally switched to the RF Input
- CAL OUT EN LED ON when the internal generator output is switched to the BNC conn.,
OFF when the internal generator output is switched to the RF Input
-
RF INPUT EN LED ON when the analyzer RF Input is routed to the BNC connector
OFF when the analyzer Input is connected to the internal LISN.