NARDA PMM CA0010, User Manual, Page: 57 / 74

Sweep Mode Operating Instructions 4-11
It is also possible to copy the shown report tables to the Windows clipboard
(and then paste it where wished).
The report tables can be also saved as images, in Bitmap or JPG file format.
4.7 Autocalibration
The PMM CA0010 Click Analyzer and PMM 9010F Emi Receiver system is
equipped with a sophisticated autocalibration process.
To run the autocalibration, please follow the simple instructions below:
- Install the setup as indicated in §2-10
- switch the PMM CA0010 on, then after a short while switch also the
PMM 9010F on,
- click the Auto Calibration soft button,
- please wait for the necessary time and, at the end, click Exit soft button
PMM 9010F begins to control the system and automatically performs the
autocalibration, using the PMM CA0010 internal precise signal generator as
a reference.
The self-calibration process takes about 3 minutes to be completed.