NARDA PMM CA0010, User Manual, Page: 45 / 74

Setup and Panel Instructions 3-21
3.12 Autocal
The PMM CA0010 Click Analyzer and PMM 9010F Emi Receiver system is
equipped with a sophisticated autocalibration process.
To run the autocalibration, please follow the simple instructions below:
- Install the setup as indicated in §2-10
- switch the PMM CA0010 on, then after a short while switch also the
PMM 9010F on,
- press the Setup function key,
- press the Right Arrow key,
- press the CA0010 Autocal function key
- please wait for the necessary time and, at the end, press OK function
key
PMM 9010F begins to control the system and automatically performs the
autocalibration, using the PMM CA0010 internal precise signal generator
as a reference.
The self-calibration process takes about 3 minutes to be completed.
Fig. 3-11 Autocal
To interrupt the self-calibration, press the function key labeled Abort.