NARDA PMM CA0010, User Manual, Page: 30 / 74

3-6 Setup and Panel Instructions
3.6 Start
As soon as the Setup has been done (see § 3.7), it is possible to start the
test.
First of all the PMM CA0010 and 9010F will determine the click rate N, and
– if all the conditions apply – after that the analyzer will immediately
continue measuring the number of clicks exceeding the upper quartile limit
L
q
.
Simply select Start : the PMM 9010F will automatically take care of all the
necessary data, reporting at the end of the test all the relevant results.
Fig. 3-3 Start
During the test, the evolution of the measurements can be continuously
controlled in the Data and Details windows, where all the info are duly
provided.
At any time, it is possible to
Stop the measure or to Pause it.
The PMM CA0010 and 9010F does the determination of the click rate at
the two frequencies of 150 kHz (
CH1 ) and 500 kHz ( CH2 ) simultaneously.
Be sure the battery of the PMM 9010F is fully charged, or the provided
AC/DC adapter is supplying the unit, before running a measurement.