NARDA PMM CA0010, User Manual, Page: 43 / 74

Setup and Panel Instructions 3-19
3.10 Diagnostic In case the PMM CA0010 unit is not connected – or anyway non properly
functioning – the display of the PMM 9010F, after entering the Click window,
will show again one of the channels in Idle mode, but without the indications
“CH
n” in the middle of the first line, just on the left of the Attenuator
indication, and “CA0010” in the center of the second line.
Fig. 3-9 Diagnostic
In the situation above, the PMM 9010F is working as a single channel Click
Analyzer.
In case of unexpected conditions, please check both HW connections and
SW settings at first.