NANO VDR 2600, Instruction Book, Page: 80 / 96

Description
Regularly check:
• The pressure dew-point on the display of the control panel. The pressure dew-point will deviate
from nominal if the air inlet conditions or volume flow differ from nominal.
• That condensate is discharged. The amount depends on the operating conditions.
5.5 Stopping
Control panel
Procedure
Step Action
1 Close dryer inlet and outlet valves (customer's installation).
2
Press stop button (6). The electronic valves will go to 0% opening and then the
dryer stops. Voltage on sign (5) remains lit. Leave the voltage on if the dryer has
to remain on stand-by.
The fans can keep running.
For water-cooled versions: Close the water inlet and outlet valves of the cooling
water circuit (customer's installation). If the dryer is installed in a room where
freezing temperatures are expected, drain the cooling water circuit.
Instruction book
78 2987 2020 00