NANO VDR 2600, Instruction Book, Page: 33 / 96

3 Vision
01
Touch controller
3.1 Controller
Figure 20: The Vision
01
Touch controller
Introduction
The controller has the following functions:
• Controlling the unit
• Protecting the unit
• Monitoring components subject to service
• Automatic restart after voltage failure (ARAVF)
Automatic control of the unit
The controller maintains a stable dew-point during operation by automatically adjusting the cooling
water flow (only water-cooled units).
The controller maintains a stable dew-point during operation by automatically adjusting the cooling
air flow (only air-cooled units).
A number of modes can be selected so the machine best fulfills the customer's needs. See
Machine settings menu.
A number of time based automatic start/stop commands may be programmed.
Take into account that a start command will be executed (if programmed and
activated), even after manually stopping the unit.
Protecting the unit
Shutdown
Instruction book
2987 2020 00 31