NANO VDR 2600, Instruction Book, Page: 52 / 96

It is possible to select one of three dryer operation modes:
• Lowest Dewpoint: The lowest possible dewpoint will be maintained at all times but not lower
than 3 °C
• Economy: Lower energy consumption but dewpoint will be higher in some cases
• Maximum Saving: Lowest energy consumption but dewpoint will be higher in some cases
It is possible to select two dewpoint alarm modes:
• Variable: An alarm will be given when the dewpoint exceeds a selected number of degrees
above the setpoint
• Fixed: An alarm will be given when the dewpoint exceeds a selected value
Auxiliary equipment parameters menu
Tap the Aux. Equipment Parameters icon to enter the auxiliary equipment parameters menu.
This menu shows an overview of all the auxiliary equipment fitted.
Through this menu, the parameters of the auxiliary equipment can be changed.
Modify a setting
When tapping a list item, a selection screen pops up. The user can modify the setting by tapping ‘–’
or ‘+’ and can confirm by tapping ‘V’ or decline by tapping ‘X’.
Auto restart menu
If the function is activated and provided the regulator was in the automatic
operation mode, the unit will automatically restart if the supply voltage to the
module is restored.
The ARAVF label shall be glued next to the controller.
Tap the Auto restart icon to enter the Auto Restart menu.
The controller has a built-in function to automatically restart the unit when the voltage is restored
after voltage failure. For units leaving the factory, this function is made inactive. If desired, the
function can be activated. Consult your supplier.
Instruction book
50 2987 2020 00