© by N&W GLOBAL VENDING S.p.A.
3
11 2008 3275 00
POSiTiONiNg THE VENDiNg mACHiNE
the machine is not suitable for installation outdoors. It
must be installed in a dry room at a temperature ranging
from 2°c to 34°c.
It can not be installed in a room where water jets are
used for cleaning (e.g. large kitchens, etc.).
The machine must be installed far from a source of
heat, near a wall, and in such a way that the back is
min. 100 mm. far from the wall in order to provide
for regular ventilation, above all in the area where
the compressor is arranged
.
if the vending machine is placed next to the other
machines,leave at least 20 mm. between the ma-
chines to open the door properly.
It shall not be covered by a piece of cloth or alike.
the machine must be arranged in such a way that the
maximum inclination will not exceed 2°.
If necessary, level it by using the adjustable feet sup-
plied.
If necessary, secure the machine to the floor.
the holes at the bottom of the machine are placed, as it
is shown by the figure.
Instead of securing to the floor, you can fasten to the wall
by using a spacing kit, available as an accessory, to be
fastened to the top of the machine.
ATTENTiON
if completely loaded, the machine can reach a total
static weight on the 4 support feet, ranging from
500 to 700 Kg according to the model.
the structure supporting the machine shall be suitable
for this weight to avoid any dangerous condition, such as
collapse, subsidence, damage and, in general, any kind
of instability.
Fig. 2
