© by N&W GLOBAL VENDING S.p.A.
16
11 2008 3275 00
the slots of the cam are marked by the numbers
stamped on the cam.
close slots 1 - 2 and 3 to dispense in single row;
-
close slots 1 and 3 to dispense in double row;
-
close slot 3 to dispense in triple row;
-
all slots must be open to dispense in quadruple row.
-
a
Nti
-
frictioN
ElEmENts
the anti-friction elements are made of a special plastic
material helping products to slide.
Anti-friction elements shall be assembled on the deflec
-
tors of
double columns
and on the corresponding hand
wall on the left when bottles are being dispensed.
they are not required in single columns or if cans are
being dispensed.
Four anti-friction elements shall be used for every single
double column. they shall be assembled according to
the height of bottles and the number of rows, as it is
specified by fig. 24, by using the slots on the deflector.
the following table is intended to sum up the variables
relative to the number of rows per column.
Anti-friction elements shall not be used to dispense
cans and on every single column.
Product
rows
x
column
type of
side
support
cam
slots
free
position of
anti-friction
elements
can
250 cc
4
4x250
4
no
can
330 cc
4
4x330
4
no
can
355 cc
3
4x350
3
no
bottle
h>210
2
2
2
B
bottle h
210 ÷ 235
2
2
2
A
bottle
h>235
1
2
1
C
Fig. 21
Support for 1 or 2 rows
1-
Support for 4 rows
2-
Support for 4 rows (250 cc cans)
3-
Tongue
4-
Fastening screw
5-
Slot for support
6-
Fig. 23
A- Product height from 210 to 235 mm
B- Product height lower than 209 mm
C- Product height from 246 to 285 mm
Fig. 22
A- Detachable inserts
B- Closed slot
C- Open slot
Cam configuration to dispense in 1 row
1-
Cam configuration to dispense in 2 rows
2-
Cam configuration to dispense in 3 rows
3-
Cam configuration to dispense in 4 rows
4-
