© by N&W GLOBAL VENDING S.p.A.
26
11 2008 3275 00
bDv
The BDV protocol menus will enable the user to define
the following functions.
i
mmEDiatE
cHaNgE
the amount relative to a selection is generally cashed
after the machine has sent the "successful selection"
signal.
If you enable this function, which is disabled by default,
the cash signal is sent at the start of the dispensing
cycle.
the setup of this parameter is compulsory.
t
ypE
of
salE
Used to set the operation mode by multiple or single
dispensing. In case of multiple dispensing, the change
is not automatically given at the end of a successful
delivery, but the credit will remain available for further
dispensing. If you press the coin return button, the
remaining credit will be returned if its value is lower than
the maximum change value.
c
HaNgE
rEfusED
Used to enable/disable the credit return (escrow) if no
dispensing has been performed.
If enabled, this function will provide for the return of the
coins even if the first dispensing cycle has not occurred.
If a delivery has failed for any reason whatsoever, the
change will be paid upon request.
m
aximum
crEDit
Function used to define the maximum accepted credit
for inserted coins.
m
aximum
cHaNgE
You can set a limit on the total amount of the change
the coin mechanism will pay as soon as you press the
change button or after one single dispensing.
the credit exceeding the amount you have programmed
by this function will be cashed.
c
oiNs
accEptED
Used to define which coins shall be accepted among
those recognised by the validator.
For the coin/value correspondence check the label
showing the position of the coins on the coin mecha-
nism.
c
oiNs
Not
accEptED
Used to program the refusal of a coin in case of "exact
amount".
For the coin/value correspondence check the label
showing the position of the coins on the coin mecha-
nism.
v
aliDator
i
mmEDiatE
cHaNgE
the amount relative to a selection is generally cashed
after the machine has sent the "successful selection"
signal.
If you enable this function, which is disabled by default,
the cash signal is sent at the start of the dispensing
cycle.
the setup of this parameter is compulsory.
l
iNE
/v
aluE
associatioN
When the display is positioned on the "lIne-ValUe as-
SOC." function (line programming) of the "programming"
menu, you can vary the value of the 6 coin lines of the
validator from a to F.
D
Ecimal
poiNt
press the enter key
�
to display the position of the deci-
mal point, i.e.
0
decimal point disabled
1
XXX.X (one decimal digit after the point)
2
XX.XX (two decimal digits after the point)
3
X.XXX (three decimal digits after the point)
If you press the enter key
�
, these values will flash on
and off and they can be modified.
o
vErpay
You can decide whether to cash or leave the credit ex-
ceeding the selection amount at the user's disposal.
E
xEcutivE
v
ErsioN
You have to choose among the following payment sys-
tems for the executive system:
standard
-
price holding
-
UKEY (Price holding price display)
-
sIDa
-
i
mmEDiatE
cHaNgE
the amount relative to a selection is generally cashed
after the machine has sent the "successful selection"
signal.
If you enable this function, which is disabled by default,
the cash signal is sent at the start of the dispensing
cycle.
