© by N&W GLOBAL VENDING S.p.A.
24
11 2008 3275 00
mANAgEmENT OF CHANgE TuBES
From this menu you can manually load or empty the
change tubes of the coin mechanism.
tUBe ManaGeMent
tube load
tube unload
FIll> x.x
fill
tHE
tubEs
If you confirm the function, “Credit : ——” will appear on
the display. this is the value of the money made avail-
able in the tubes for the change. If you insert a coin into
the selector, the display will increase the value of the
money made available in the tubes for the change.
uNloaD
tHE
tubEs
If you confirm the function, you can establish the tube on
which you wish to act.
Whenever you press the enter key
�
, a coin is ejected
by the active tube.
SPECiAL SELECTiONS
v
irtual
pricE
rEturN
Use this function if you do not wish to cash the price
of the second selection if the second dispensing cycle
of a virtual selection should fail (only if MDB payment
systems or validators are in use). For the other payment
systems, you can establish whether to return the whole
amount or not.
important!
if the motors of these selections should fail, follow
the procedure of the "motors/Selections" menu to
configure the machine.
TEST
s
ElEctioNs
Use this function to simulate the normal dispensing
mode of products without inserting the amount to check
the operation of the spiral rotation by pressing the selec-
tion buttons.
gSm PrEALArmS
the control software can send an “ending product”
signal via GSM modem when a well-defined (program
-
mable) number of pieces of a given product is lacking.
Use this function to reset the counters intended to man-
age prealarms.
EVADTS TrANSFEr
If you activate this function, the machine will be waiting
for connection with a device for the purpose of acquiring
eVaDts statistics.
