AL3A-RM User Guide Version B
Document Number: 451-93156-002B
29 of 172
6
C
ONFIGURATION
S
ETTINGS
The A3LA-RM allows users to configure its data port communication parameters. The three
configuration types are active, factory default, and stored.
Active:
The active configuration is the set of parameters currently in use. They can be
changed individually via specific AT commands.
Factory default:
The factory default configuration is stored in permanent memory. This
configuration can be recalled at any time through use of the
AT&Fn
command.
Stored:
Two groups of settings, or “profiles,” can be stored as user-defined
configurations.
o
First create desired active configurations and then write them to memory using the
AT&Wn
command.
o
These profiles can be designated to be loaded as the active configuration upon
A3LA-RM power-up through use of the
AT&Yn
command.
o
The A3LA-RM can be reset without loss of power to these profiles through use of
the
ATZn
command.
o
The configuration settings are stored in “S-register” locations and are detailed in
