AL3A-RM User Guide Version B
Document Number: 451-93156-002B
124 of 172
0 Disable the MPT functionality during a data call.
1 Enable the MPT functionality during a data call.
Read Command: ^MPTDC?
Query the current modem power toggle data connection mode. The response is in the
form:
^MPTDC: <mode>
Test Command: ^MPTDC=?
List the supported modem power toggle data connection modes. The response is in
the form:
^MPTDC: (supported <mode>s)
B.131
^MPTFP-
M
ODEM
P
OWER
T
OGGLE
F
ORCED
P
OWER
-
CYCLE
Exec Command: ^MPTFP = [<mode>]
Enable or disable the modem power toggle forced power-cycle functionality. Every
twenty-four hours the modem will attempt to find a period of inactivity to cycle the
power. If it cannot find a period of inactivity, it will retry a set number of times, after
which it will force a power-cycle. The forced power-cycle will not occur during a data
connection.
<mode> takes the following values:
0 Disable the MPT forced power-cycle functionality.
1 Enable the MPT forced power-cycle functionality.
Read Command: ^MPTFP?
Query the current modem power toggle data connection mode. The response is in the
form:
^MPTFP: <mode>
Test Command: ^MPTFP=?
List the supported modem power toggle data connection modes. The response is in
the form:
^MPTFP: (supported <mode>s)
