AL3A-RM User Guide Version B
Document Number: 451-93156-002B
117 of 172
Note:
A user interface may prompt the user for two copies of the new password, in
which case it should check the two are identical as only one copy is needed for this
command.
Test Command:
+CPWD=?
Test command returns a list of pairs which present the available facilities and the
maximum length of their password. Response is in the form:
+CPWD: list of supported (<fac>,<pwdlength>)s
where <pwdlength> indicates the maximum length for the password.
Note:
+CPWD is closely related to +CLCK and +CPIN. See these commands for
additional information.
B.115
+CSDT
–
S
IDETONE
Exec Command:
+CSDT=<sidetone enabled>
This command controls the A3LA-RM RF board sidetone generation. Enabling sidetone
will cause the A3LA-RM to start sidetone generation. Disabling sidetone will cause the
A3LA-RM to stop sidetone generation. The following parameter values are currently
supported:
< sidetone enabled >:
1
Enable sidetone
0
Disable sidetone
Query Command:
+CSDT?
This command returns the current transceiver board sidetone generation state. 1 =
enabled, 0 = disabled.
Test Command:
+CSDT=?
Test command returns a list of valid values. Response is in the form:
+CSDT: list of supported modes
B.116
+CDSI
–
R
EPORT
SMS
STATUS
This announcement is sent when the network responds after a mobile-originated SMS
send attempt.
