AL3A-RM User Guide Version B
Document Number: 451-93156-002B
90 of 172
output)
3
“XXXXXXXX” (Software revision level)
4
“IRIDIUM” (Product description)
5
“XXXX” (Country code)
6
“XXX” (Factory identity)
7
“XXXXXXXX” (Hardware specification)
B.94
+CIER
–
I
NDICATOR
E
VENT
R
EPORTING
Set Command:
+CIER=[<mode>[,<sigind>[,<svcind>]]]
The set command enables or disables sending of the +CIEV unsolicited result code by
the A3LA-RM in case of indicator state changes. <mode> controls the processing of
the +CIEV unsolicited result codes.
<mode>:
0
Disable indicator event reporting; do not send +CIEV unsolicited result
codes to the DTE; buffer the most recent indicator event for each indicator in the
A3LA-RM. (default)
1
Enable indicator event reporting; buffer the most CIEV unsolicited
result code for each indicator when the data port is not in command mode, and
flush them to the DTE on return to command mode; otherwise forward events
directly to the DTE.
<sigind>: Control reporting of “signal quality” indicator changes.
0
No “signal quality” indicator reporting
1
Enable “signal quality” indicator reporting using result code +CIEV:0,<rssi>
where <rssi> is:
0
Equivalent to 0 bars displayed on the signal strength
indicator
1
Equivalent to 1 bar displayed on the signal strength
indicator
2
Equivalent to 2 bars displayed on the signal strength
indicator
