AL3A-RM User Guide Version B
Document Number: 451-93156-002B
59 of 172
Test command returns the supported settings of the A3LA-RM. Response is in the
form:
+CNMI: (list of supported <mode>s),(list of supported <mt>s),(list of supported
<bm>s),(list of supported <ds>s),(list of supported <bfr>s)
B.43
+COPS
–
O
PERATOR
S
ELECT
Set Command:
+COPS=[<mode>[,<format>[,<oper>]]]
Set command forces an attempt to manually register the A3LA-RM to the network.
Only IRIDIUM as <oper> is supported.
Valid values for the parameters are outlined below.
<mode>:
automatic (<oper> field is ignored) (default)
manual (<oper> field is optional)
<format>:
long format alphanumeric <oper>
short format alphanumeric <oper>
numeric <oper>
<oper> is of string type enclosed by quotes“”; for example “IRIDIUM”. <format>
indicates if the format is alphanumeric or numeric; long alphanumeric format can be
up to 16 characters long and short format up to 8 characters; numeric format is the
Location Area Identification number which consists of a three BCD (Binary Coded
Decimal) digit country code plus a two BCD digit network code; hence the number has
structure: (country code digit 3)(country code digit 2)(country code digit 1)(network
code digit 2)(network code digit 1). Since IRIDIUM is the only operator, the short and
long format is “IRIDIUM” and the numeric format is “90103”. These are the only values
accepted.
Note that setting the <mode> to manual does not disable automatic registration of
the A3LA-RM to the network. It just forces a manual registration procedure when
entered.
Read Command:
+COPS?
