AL3A-RM User Guide Version B
Document Number: 451-93156-002B
99 of 172
Command Response:
+SBDDET:<status>,<error>
where:
<status>:
0
Detach successfully performed
1
An error occurred while attempting the detach
<error>:
Gateway-reported values:
0
Detach successfully performed
1..4
Reserved, but indicate success if used
5..14 Reserved, but indicate failure if used
15
Access is denied
A3LA-RM-reported values:
16
Modem has been locked and may not make SBD calls (see +CULK
command)
17
Gateway not responding (local session timeout)
18
Connection lost (RF drop)
19
Link failure (A protocol error caused termination of the call)
20..31 Reserved, but indicate failure if used
32
No network service, unable to initiate call
33..34 Reserved, but indicate failure if used
35
A3LA-RM is busy, unable to initiate call
36..
Reserved, but indicate failure if used
This instructs the GSS to disable (detach) SBD ring alerts for the calling A3LA-RM.
Successful completion of the detach command implies that the GSS has performed
the requested detach action and the A3LA-RM is no longer registered for SBD ring
alerts. This session does not transfer any MO or MT messages.
Note:
A user can send an MO-SBD message and request a detach at the same time by
using the +SBDI command. The +SBDI command always requests a detach.
