AL3A-RM User Guide Version B
Document Number: 451-93156-002B
125 of 172
B.132
^MPTFR-
M
ODEM
P
OWER
T
OGGLE
F
ORCED
R
EGISTRATION
Exec Command: ^MPTFR = [<mode>]
Enable or disable the modem power toggle forced registration functionality. Every
hour the modem will attempt to find a period of inactivity to make a registration. If it
cannot find a period of inactivity, it will retry a set number of times, after which it will
force a registration. The modem is registered to the Iridium network by dialing a
dummy number. The forced registration will not occur during a data connection
because it is assumed that the modem is registered.
<mode> takes the following values:
0 Disable the MPT forced registration functionality.
1 Enable the MPT forced registration functionality.
Read Command: ^MPTFR?
Query the current modem power toggle forced registration. The response is in the
form:
^MPTFR: <mode>
Test Command: ^MPTFR=?
List the supported modem power toggle forced registration. The response is in the
form:
^MPTFR: (supported <mode>s)
B.133
^MPTNC-
M
ODEM
P
OWER
T
OGGLE
N
OT IN
D
ATA
C
ONNECTION
Exec Command: ^MPTNC = [<mode>]
Enable or disable the modem power toggle functionality out of a data connection.
When not in a data connection, after there has been a two-minute period of inactivity,
there will be a check sent to determine if the modem is still responding. If it is not, the
modem will power cycle and return in command mode.
<mode> takes the following values:
0 Disable the MPT functionality out of a data call.
1 Enable the MPT functionality out of a data call.
