AL3A-RM User Guide Version B
Document Number: 451-93156-002B
88 of 172
B.89
+SBDC
–
S
HORT
B
URST
D
ATA
:
C
LEAR
SBD
MOMSN
Exec Command:
+SBDC
This command will clear (set to 0) the mobile originated message sequence number
(MOMSN) stored in A3LA-RM.
The MOMSN is maintained even after power cycle. Command Response:
0: The MOMSN was cleared successfully
1: An error occurred while clearing the MOMSN
B.90
+SBDS
–
S
HORT
B
URST
D
ATA
:
S
TATUS
Exec Command:
+SBDS
This command returns current state of the mobile originated and mobile terminated
buffers.
Command Response:
+SBDS: <MO flag>, <MOMSN>, <MT flag>, <MTMSN>
where:
<MO flag>: The MO flag indicates the existence of a message in the mobile originated
buffer. The response from the A3LA-RM is one of the following numeric codes:
0:
No message in mobile originated buffer
1:
Message in mobile originated buffer
<MOMSN>: The MOMSN identifies the sequence number that will be used during the
next mobile originated SBD session.
<MT Flag>: The MT flag indicates the existence of a message in the mobile terminated
buffer. The response from the A3LA-RM is one of the following numeric codes:
0:
No message in mobile terminated buffer
1:
Message in mobile terminated buffer
<MTMSN>: The MTMSN identifies the sequence number that was used in the most
recent mobile terminated SBD session. This value will be –1 if there is nothing in the
mobile terminated buffer.
