HotShot SC User Manual
Rev 1.2.5 –March 2012
© NAC Image Technology Inc
Jimmy Robinson
63
Will enable scroll bars to allow easy scrolling when
zoomed into the graph
When a data channel is selected; will invert the data i.e. if
Y-axis data is 30,50,60 inverting will make it –30, -50, -60.
Change the font of the list view’s font
Rename the graph’s title
Allows the X-Axis’ or Y-Axis’ data to be multiplied by a
factor and the Axis’s units to changed; useful for example
if data is in metres and it is needed to be shown in cm. In
this case the X-Axis’ data would be multiplied by 100 and
the units would be changed from ‘m’ to ‘cm’.
Use the
Graph View | List View
tab to select the desired view.
In graph view a cursor will scroll along the graphs showing the synchronisation point
with
master time
. In list view the data table will scroll.
7.2.4 Graph Menus
Use this…
To do this…
Graph|Rename
Rename the Graph
Graph|Copy
Copy the graph image to the clipboard
Graph|Print|Printer / File
…
Print the graph to a printer or file
Graph|Export T/HIS…
Save each plot on a graph as an ASCII Time History
Graph|Unload
Close the Graph Window.
Custom|Zoom Scrolling
Place Scroll Bars on the graph when the graph is zoomed
Custom|Undo Zoom
Undo any zoom on the graph
Custom|List Font..
Set the font used in the List View
Analysis|Invert
Invert the selected channels (see selecting channels to
manipulate)
7.2.5 Selecting Channels to manipulate
Where there is more than one channel plotted on a graph you can select a channel
using the legend on the right hand side of the graph. A RIGHT CLICK will select the
channel. To select multiple channels use a LEFT CLICK. To deselect RIGHT CLICK
again.
You need to select channels in order to do the following:
