HotShot SC User Manual
Rev 1.2.5 –March 2012
© NAC Image Technology Inc
Jimmy Robinson
49
selected area will appear in the area below the Define Area Button as shown in the
above Screen Shot.
6.15.1.2
Live Monitor
Checking the Live Monitor will allow the current threshold level of the target area to
be displayed in the Threshold monitor.
In the example left, the image in the auto trigger area has changed by
a nominal value of 14. The threshold (sensitivity) for the Auto Trigger
is set to 15. If the image changes slightly more then the camera will
trigger.
6.15.1.3
Enable Auto Trigger
This must be checked for the auto trigger to be active. You should check this just
prior to putting the camera into ARM Mode.
6.15.1.4
Adjusting the Auto Trigger Threshold
The Arrow to the left of the threshold monitor can be moved up and down the bar to
adjust the Auto Trigger Threshold.
6.15.2 Auto
Run
This button will activate / De-Activate the Auto Run function (see section 6.16.7).
6.16 Main Menus
Use this …
To do this…
See Control Area for More information
File
Connect
Connect to a Camera
