HotShot SC User Manual
Rev 1.2.5 –March 2012
© NAC Image Technology Inc
Jimmy Robinson
39
To cancel the calibration click
Cancel
.
To accept the calibration click
OK
.
6.14.2 Measure
Distance
To make a distance measurement in the image press down the
Measure
Button
.
Now
Click and Drag
in the image. The length of the dragged line is displayed
next the the measure button. The units of measurement will be the same as the
calibration units. You can keep making measurements unit you click the
Measure
Button Again.
The
measure
button is a TOGGLE button.
6.14.3 Manual
Tracking
Reticule
The Manual Tracking tool will allow you to manually track up to ten (10) points in the
image. The results are stored in an CSV file that can easily be opened in a spreadsheet
application.
To begin manual tracking click the Manual Tracking Button
A floating window will appear as shown below :
Use this …
To do this…
Open File
Open a previously saved Reticule File (WARNING :
Will overwrite and current data)
Save File
Save the Current reticule data to the file
Save as new File
Save the Current Reticule data to a NEW file
Zoom In
Zoom in the Image
Zoom Out
Zoom out the image
Undo Zoom
Undo the Zoom (return to original size)
Delete Current
Point Data
Delete the coordinate data for the current point
Delete All Point
Data
Delete the current coordinate data for ALL Points
(on
